MITECH MFD800C Ultrasonic Flaw Detector

1. Oil-proof, water-proof, dust-proof 2. Knobe make operation easily 3. Colorful B scan function 4. 10 hours working time  Introduction

The MFD800C is an advanced digital ultrasonic flaw detector featuring a multi-color TFT LCD and a host of new features to meet challenging inspection requirements. It combines powerful flaw detection and measurement capabilities, extensive data storage, and the ability to transfer detailed inspection data to the PC via its high-speed USB port.

The instrument incorporates many advanced signal processing features including a 15MHz RF bandwidth to permit testing of thin materials, narrowband filters to improve signal to noise in high gain applications, a spike pulser for applications requiring higher frequencies, and a tunable square wave pulser to optimize penetration on thick or highly attenuating materials.

The instrument can be widely used in locating and sizing hidden cracks, voids, disbands, and similar discontinuities in welds, forgings, billets, axles, shafts, tanks and pressure vessels, turbines, and structural components.

Specifications

Range: 0 to 9999 mm, at steel velocity

Material Velocity: 1000 to 9999m/s

Display Delay: -20 to 3400 µs

Probe Delay/Zero Offset : 0 to 99.99µs

Sensitivity: 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB and locked.

Test Modes: Pulse echo, dual element and thru-transmission

Pulser: Tunable Square Wave Pulser

Pulse Repetition Frequency ranges from 10 Hz to 1000 Hz

Pulse Energy: 200V, 300V, 400V, 500V, 600V selectable

Bandwidth (amplifier bandpass ): 0.2 to 20 MHz

Gate Monitors: Two independent gates controllable over entire sweep range

Rectification: Positive half wave, negative half wave, full wave, RF

System Linearity: Horizontal: +/-0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy +/-1 dB.

Reject (suppression): 0 to 80% full screen height

Units: Inch or millimeter

Transducer Connections: BNC or LEMO

Power Requirements: AC Mains 100-240 VAC, 50-60 Hz

Operating Temperature: -10°C to 50°C

Storage Temperature: -30°C to 50°C

Instrument Package

No.	Item	Qty.
1	Portable Ultrasonic Flaw Detector with multi-color TFT LCD Display	1
2	Straight Beam Transducer (4 MHz, Φ10)	1
3	Angle Beam Transducer (4 MHz, 8 mm×9 mm, 60°)	1
4	Interconnect Cable for the transducer (Q9-C5,or optional C9- C5)	1
5	Rechargeable Li-Ion Battery Package, 8.8 amp hour	1
6	Power supply/charger unit	1
7	Handle	1
8	Operating Manual in English	1
9	Datapro Software	1
10	USB Cable (Model: MUSB01)	1

Cross keypads can help you operate equipment easily by one hand.

Colorful B scan function can help you see crack/air bubble/impurity clearly on the screen.

Test range can reach to 9999mm.

 Large volume battery can make equipment work about 10 hours.

 Weld Figure feature can help you find flaw in welding stream directly when you use angle transducer to detect.

USB interface can connect with the computer. Power interface can recharge the battery.

Rotary knob can help you adjust the data quickly.

You can place the equipment as you like with the swiveling support handle.

The standard accessories.

Gost Certificate

ISO Quality Certificate

Difference Among Mitech Ultrasoinc Flaw Detector

MITECH MFD800C Ultrasonic Flaw Detector

Verified Information This information is Verified by Bureau Veritas and validity period is 2012/05/22 --- 2013/05/22 All the information below may covers both Gold Supplier and its related companies , Their Relationship will be affirmed according to china laws and regulations , also it will be clearly display in the full report >> Production Capacity: Product line name Production Line Capacity Actual Units Produced(Previous Year)

Hardness Tester, Thickness Gauge, Flaw Detector	15,200 PCS per year	8,700 PCS

Export Market Distribution: Market Revenue(Previous Year) Total Revenue (%)

North America	USD 185,294	4.49
South America	USD 38,603	0.94
Eastern Europe	USD 24,449	0.59
Southeast Asia	USD 24,444	0.59
Africa	USD 24,295	0.59
Mid East	USD 24,296	0.59
Eastern Asia	USD 25,397	0.62
Southern Europe	USD 23,809	0.58
South Asia	USD 401,471	9.73
Domestic Market	USD 3,354,926	81.28

Production Machinery: Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition

Soldering iron	HAKO & 936	10	1.0	Acceptable
Electric screw driver	JZR & 1500	10	2.0	Acceptable

Testing Machinery: Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition

Oscillograph	TEKTRONIX & TDS1012B	4	5.0	Acceptable
Digital multimeter	UNI-T & UT68E	4	5.0	Acceptable
Digital frequency instrument	SAMPO & CN3165	4	5.0	Acceptable

Production Flow: 1.Inspection of Raw Material 2.Welding 3.Processing Debugged 4.Assembling 5.Final Debugging 6.Package Certification: Certified Picture Certification Name Certified By Certificate No. Product Name & Model No. Available Date-Expired Date

	CE	Eurofins Product Service GMBH, Certification Body	SCC(09)-111-6-10-EMC	Leeb Hardness Tester & MH320, MH310	2009/12/16 --- 2049/12/31

Testing Report: Report Picture Report Name Report By Product Name & Model No. Report Date

	Product Inspection Report	China Classification Society	Digital Ultrasonic Flaw Detection & MUT500B	2010/09/29