MITECH MFD510B Ultrasonic Flaw Detector

1 MITECH MFD510B Portable Ultrasonic Flaw Detector 2 TFT LCD display 3 High accuracy 4 Test various flaws 5 CE,ISO9001,GOST

FUNCTIONS

Semiautomatic two point calibration,Automated calibration of transducer zero offset and/or material velocity

Flaw Locating,Live display Sound-path, Projection (surface distance), Depth, Amplitude,

Flaw sizing,Automatic flaw sizing using AVG/AVG or DAC, speeds reporting of defect acceptance or rejection.

Digital Readout and Trig. Function,Thickness/Depth can be displayed in digital readout when using a normal probe and Peam path, Surface Distance and Depth are directly displayed when angle probe is in use.

Both the DAC and the AVG method of amplitude evaluation are available.

TVG(Time Varied Gain).

AWS D1.1.

Curved Surface Correction feature

Crack Height Measure function

Weld figure feature

Magnify gate,spreading of the gate range over the entire screen width

Video Recording and play

Auto-gain function

Envelope, Simultaneous display of live A-scan at 60 Hz update rate and envelope of A-scan display

Peak Hold,Compare frozen peak waveforms to live A-Scans to easily interpret test results.

A Scan Freeze,Display freeze holds waveform and sound path data

B Scan display feature

SPECIFICATIONS

Range,0 to 9999 mm, at steel velocity

Material Velocity,1000 to 9999m/s

Display Delay, -20 to 3400 µs

Probe Delay/Zero Offset ,0 to 99.99µs

Sensitivity,110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB and locked.

Test Modes, Pulse echo, dual element and thru-transmission

Pulser,Tunable Square Wave Pulser

Pulse Repetition Frequency ranges from 10 Hz to 1000 Hz

Pulse Energy,Low, Medium and High

Damping, 100, 200, 400 ohms

Bandwidth (amplifier bandpass )  0.5 to 15 MHz

Gate Monitors,Two independent gates controllable over entire sweep range

Rectification,Positive halfwave, negative halfwave, fullwave, RF

System Linearity: Horizontal:,+/-0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy +/-1 dB.

Reject (suppression),0 to 80% full screen height

Units,Inch or millimeter

Transducer Connections, BNC or LEMO

Power Requirements, AC Mains 100-240 VAC, 50-60 Hz

Operating Temperature,-10°C to 50°C

Storage Temperature  -30°C to 50°C

keyboard

Standard Configuration

Highlighted  screen  display

the back and CE

Core accessories

carriage

Full English display and high resolution make your operation more convenient .

Strong case box

 probe

cable

USB interface can connect with the computer. Power interface can recharge the battery.

Rotary knob can help you adjust the data quickly.

rechargeable batteries

leather handle

Weld Figure feature can help you find flaw in welding stream directly when you use angle transducer to detect.

MITECH MFD510B Ultrasonic Flaw Detector