MDW-E Microcomputer control Electronic Universal Testing Machine(Common configuration Gate type)

Applicable for tensile tests of material like rubber, plastic, textile, waterproof material, cable, network wire, metal wire etc

I. Function and purposeSeries MDW-E Microcomputer control electronic universal testing machine is applicable for tensile tests of material like rubber, plastic, textile, waterproofing material, cable, network wire, metal wire, metal rod, metal plate and others. With attaching tools, it can also do compression and bending tests.

II. Main engine structureThe engine structure is formed by the upper beam, the middle beam, the lower beam and the bottom panel with two pairs of ball screw-rod and a vertical column. The all-digital AC motor drives the reducer and the synchronic gear belt, so as to turn two pairs of high-precision and seamless ball screw-rod, and to make the beam move up and down.

III. Main engine frameworkThe high-precision and seamless ball screw-rod has improved transmission efficiency and displacement precision. The upper beam and working table is fixed with high-intensive light bars, which constitute a highly rigid frame structure.

IV. Displacement measuring deviceThe relative accuracy can reach up to ± 1%, with the high-precision photoelectric encoder.

V. Attaching toolA variety of materials meet all your test requirements.

VI. Testing Force measurementThe high-precision and high stability Spoke strain sensor and high-precision measuring amplification system ensures the high-precision of the test force.Multiple sensors can be used to realize a broad range of test forces according to users' requirements.

VII. Limit switchThe machine has a limit protection for auto-stop.

VIII. Software systemsWith a brand computer to control the software operating system, it has the characteristics of high speed, mild interface and easy operation. It can meet the test measurement needs of different materials. With more than a hundred of test standards, it can satisfy the requirements of international standards, national standards and industry standards.

IX. Functional Features1. Auto-calibration: The system is able to automatically achieve the calibration of standards of displayed values.

2. The big liquid crystal displayer displays the real-time test force, peak value, displacement, speed, status, etc. Throughout the trial process.

3. Breaking judgment: When the specimen is broken, move the beam to automatically stop the test.

4. Limit protection: It has mechanical and control limit protections

X. Main technical parameters

Main technical parameters	MDW-
	10	20		50		100		200		300
Structural form	floor type
Maximum testing force (KN)	10	20		50		100		200		300
Operation mode	Microcomputer control
Force measuring range	2%-100% of the maximum testing force
Relative error on indicated values of testing force	Better than ±1%of the indicated value
Error on deformation display	±1% (or±0.5% )
Minimum resolution on the testing force	0.01N
Precision on beam displacement	±1% (±0.5% )
Deformation accuracy	Better than ±1% (±0.5%)
Speed governing range	0.01-200mm/min
Testing travel	Less than700 mm (it can be customized According to the customer needs)
Testing space adjusting mechanism	Stepping motor or AC servo motor, synchronization with drive
Appearance	As per GB/T2611
Protection function	Overload protection, limit protection.
Power supply	220 V					380V
Weight (approximate kg)	400		500		600		1300		2000
Operating conditions	Ambient temperature -35°C, humidity 20% - 80%
Clamp form	Suitable clamps will be configured according to the customer requirements. Special clamps can be customized for the customer.

Note: This parameter list is only for information and is subject to change without notice. The real objects prevail for the products of our company.

MDW-E Microcomputer control Electronic Universal Testing Machine(Common configuration Gate type)